F-22 Raptor - Single OR Twin Ducted Fan / EDF Park Jet

Specs: (either single or twin edf builds)

1 or 2 - 4300 or 4400kV brushless inrunner motor
1 or 2 - 11.1v 1300-1600mah 20c lipo batteries
1 or 2 - 40amp speed controllers (esc's)
1 or 2 - 64mm ducted fan units (edf's)
2 - 9 gram servos





Build Materials:

35" x 25" sheet of 1/4 inch foam core (foam board) for the fuselage/wings/tail
6 popsicle sticks - 2.5" x 3/8" x 1/12" 
16 gauge galvanized steel wire roll or standard RC pushrods (20" needed)
Hot glue/hot glue gun or 5 min epoxy 
1.5" - 2" packing tape for control surface hinges
2 - 12" wooden BBQ skewers
1/2" - 1" Velcro with sticky back to attach speed controllers and batteries



Link:
***********************************
http://mikeysrc.com/MRC_F22_Raptor.pdf **
***********************************